|
|
|
National Stock Number:
5365-01-465-8357
Federal Supply Class:
5365
National Item Identification Number:
014658357
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 4G23004-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | HOLE DIAMETER | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5515 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, PLATE-SKID CONTROL SYSTEM | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.050 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | OVERALL LENGTH | 1.000 INCHES MINIMUM AND 1.060 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0200 INCHES NOMINAL | | OVERALL WIDTH | 0.460 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|