|
|
|
National Stock Number:
5365-01-469-1784
Federal Supply Class:
5365
National Item Identification Number:
014691784
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 17P8D9209-507 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.438 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.500 INCHES NOMINAL | | FSC APPLICATION DATA | FIXED FAN DUCT ON C-17 | | HOLE DIAMETER | 0.246 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | IRON ALLOY 660 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PAD | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.120 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.438 INCHES NOMINAL | | OVERALL LENGTH | 2.380 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES NOMINAL | | OVERALL WIDTH | 1.310 INCHES NOMINAL | | SPECIAL FEATURES | YALL 3 HOLES ARE .438 FROM ONE HOLE LENGTH WHICH HAS .44 RADIUS, NOT .12 RADIUS LIKE OTHER LENGTH. THE 3RD HOLE IS 1.188 FROM THE SIDE AT .500 TO .660 AT 90 DEGREE. THE OTHER 2 ARE .246 TO .260 AND .381 TO .391 TAPERED AT 100 DEGREE. | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|