|
|
|
National Stock Number:
5365-01-469-2803
Federal Supply Class:
5365
National Item Identification Number:
014692803
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 17P8D9209-509 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.438 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.562 INCHES NOMINAL | | FSC APPLICATION DATA | FIXED FAN DUCT ON C-17 | | HOLE DIAMETER | 0.226 INCHES MINIMUM AND 0.234 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | IRON ALLOY 660 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PAD | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.120 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.438 INCHES NOMINAL | | OVERALL LENGTH | 1.440 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES NOMINAL | | OVERALL WIDTH | 1.310 INCHES NOMINAL | | SPECIAL FEATURES | ONE LENGTH SIDE HAS RADIUS END OF .44 AND OTHER LENGTH SIDE HAS RADIUS ENDS OF .12. THE 2 HOLES ARE .226 TO .234 WITH TAPER OF .410 TO .400 AT 100 DEGREES ON THE .44 RADIUS SIDE. | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|