|
|
|
National Stock Number:
5365-01-473-1292
Federal Supply Class:
5365
National Item Identification Number:
014731292
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 370403-1 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| APERTURE DIAMETER | 0.452 INCHES MINIMUM AND 0.459 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.158 INCHES MINIMUM AND 0.168 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 11-A-362,COND T3 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FITTING-ENGINE ACCESS DOOR, AFT NAC | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.171 INCHES MINIMUM AND 0.177 INCHES MAXIMUM | | OVERALL THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | OVERALL WIDTH | 1.270 INCHES MINIMUM AND 1.330 INCHES MAXIMUM | | SPECIAL FEATURES | SURFACE TREATMENT PER LAC PROCESS BULLETIN G-14 FOR FINISH CODE | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|