|
|
|
National Stock Number:
5365-01-474-6746
Federal Supply Class:
5365
National Item Identification Number:
014746746
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 814177 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 814177-5 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| INSIDE DIAMETER | 3.875 INCHES NOMINAL | | OUTSIDE DIAMETER | 5.355 INCHES MINIMUM AND 5.435 INCHES MAXIMUM | | OVERALL THICKNESS | 0.018 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,THRUST BEARING | | SPECIAL FEATURES | SMALLEST BOLT HOLE QUANTITY IS 12, 6 BOLTS WITH A BOLT HOLE DIAMETER MINIMUM .234 INCHES AND MAXIMUM .242 INCHES AND 6 BOLTS LOCATED ON THE INSIDE EARS OF THE INSIDE DIAMETER WITH A BOLT HOLE DIAMETER MINIMUM OF .209 INCHES AND MAXIMUM OF .217 INCHES, LARGE BOLT HOLE QUANTITY IS 3 WITH A BOLT HOLE DIAMETER OF .531 INCHES, THE BOLT HOLE CIRCLE DIAMETER FOR 6 SMALL BOLTS AND 3 LARGE BOLTS IS 4.480 INCHES |
|
|