|
|
|
National Stock Number:
5365-01-476-0283
Federal Supply Class:
5365
National Item Identification Number:
014760283
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 467523 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | 467523-1 | 00752 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.300 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.060 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.440 INCHES NOMINAL | | OVERALL LENGTH | 1.600 INCHES NOMINAL | | OVERALL THICKNESS | 0.040 INCHES NOMINAL | | OVERALL WIDTH | 0.600 INCHES NOMINAL | | SPECIAL FEATURES | HOLE IS NOT CIRCULAR; HOLE LENGTH - .265 IN., HOLE WIDTH - .218 IN. AND HOLE CORNER RADIUS - .132 IN.; TECH DATA NOT AUTHORIZED TO BE RELEASED OUTSIDE THE US | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541E,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|