5999-01-485-6610 SHIELDING GASKET,ELECTRONIC Index 4320-01-485-6612 ROTOR AND SHAFT PUMP ASSEMBLY

National Stock Number:
5365-01-485-6611

Federal Supply Class:
5365

National Item Identification Number:
014856611

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
LSCP26026301417GENERAL DYNAMICS LAND SYSTEMS INC.
LSCP260263-201417GENERAL DYNAMICS LAND SYSTEMS INC.


Techincal Specification:
OVERALL LENGTH15.432 INCHES NOMINAL
OVERALL THICKNESS0.500 INCHES NOMINAL
OVERALL WIDTH13.849 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 6061
PART NAME ASSIGNED BY CONTROLLING AGENCYSPACER,CCP
SPECIAL FEATURESFOUR CORNERS, R .375 OUTSIDE, R .13 INSIDE:SIX HOLES EA LEANGTH.FIVE HOLES EA. WIDTH, 22 HOLES TOTAL, 0.280 DIA.
STYLE DESIGNATORRECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONIL-C-46168 FED SPEC 10TH TREATMENT RESPONSE
SURFACE TREATMENTPAINT


Click here to Register for Free 30-day Trial