|
|
|
National Stock Number:
5365-01-487-5724
Federal Supply Class:
5365
National Item Identification Number:
014875724
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 317586=74-2 | 99207 | GENERAL ELECTRIC COMPANY | | 3175874 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3175874-2 | 2N935 | BOEING DISTRIBUTION SERVICES X, INC. | | 3175874-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3175874-2 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 1.530 INCHES MINIMUM AND 1.560 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.436 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.230 INCHES MINIMUM AND 2.330 INCHES MAXIMUM | | OVERALL THICKNESS | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 321 | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|