|
|
|
National Stock Number:
5365-01-488-5221
Federal Supply Class:
5365
National Item Identification Number:
014885221
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5HB44331-151 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 1.440 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | OVERALL THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL WIDTH | 0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM CONTAINS TWO BOLT HOLES LOCATED ON SAME CENTER LINE 0.335 FROM OUTSIDE EDGE, CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH IS 0.203-0.209 AND DIA. OF OTHER HOLE IS 0.098 MADE FROM 5PTMKG58 CLASS 2 TYPE 16 COTTON / PHENOLIC COMPOSITE LAMINATED SHEETS | | STYLE DESIGNATOR | RECTANGULAR | | MATERIAL | COTTON AND PLASTIC PHENOLIC | | PROPRIETARY CHARACTERISTICS | PACS |
|
|