|
|
|
National Stock Number:
5365-01-488-6911
Federal Supply Class:
5365
National Item Identification Number:
014886911
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5PTC1019E32-320 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12; 7075-T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, SOLID, ALUMINUM | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 19.970 INCHES MINIMUM AND 20.030 INCHES MAXIMUM | | OVERALL THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM | | OVERALL WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM | | SPECIAL FEATURES | COVERED WITH LOW DENSITY WATERBORNE EPOXY PRIMER PER 5PTMRT03 | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE 1, CLASS 1, TYPE 1B, CLASS 1, TYPE 1C, CLASS 1 OR TYPE II, CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE AND PRIMER |
|
|