|
|
|
National Stock Number:
5365-01-488-7392
Federal Supply Class:
5365
National Item Identification Number:
014887392
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5PTC1019B64-160 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12; 7075-T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, SOLID, ALUMINUM | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.970 INCHES MINIMUM AND 10.030 INCHES MAXIMUM | | OVERALL THICKNESS | 0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM | | OVERALL WIDTH | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM | | SPECIAL FEATURES | COVERED WITH LOW DENSITY WATERBASE EPOXY PRIMER PER 5PTMRT03 | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TYPE 1, CLASS 1, TYPE 1B, CLASS 1, TYPE 1C, CLASS 1, OR TYPE II, CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE AND PRIMER |
|
|