|
|
|
National Stock Number:
5365-01-494-7064
Federal Supply Class:
5365
National Item Identification Number:
014947064
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5PTC1013H5C | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | ASM-DTL-22499, COMP 5, TYPE II, CL 2 ASSN STD SINGLE MATERIAL RESPONSE AND MIL-T-9046 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,WASHER,LAMINATED | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM | | OVERALL THICKNESS | 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM | | SPECIAL FEATURES | CENTER HOLE SHALL BE PUNCHED FROM LAMINATED SIDE ONLY, WITH NO EVIDENCE OF RAISED LAMINATE MATERIAL AROUND THE HOLE. | | STYLE DESIGNATOR | CIRCULAR | | APERTURE DIAMETER | 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 10 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL |
|
|