|
|
|
National Stock Number:
5365-01-495-7520
Federal Supply Class:
5365
National Item Identification Number:
014957520
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3507AS483 | 072E5 | VERTEX MODERNIZATION AND SUSTAINMENT LLC | | 3507AS483 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.250 INCHES NOMINAL | | BOLT HOLE QUANTITY | 8 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.365 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | AGAV | | HOLE DIAMETER | 0.194 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.310 INCHES NOMINAL | | OVERALL LENGTH | 10.175 INCHES NOMINAL | | OVERALL THICKNESS | 0.625 INCHES NOMINAL | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY-SPACER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B221,ALLOY 6061,TEMPER T6 OR T6511 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | FROM LEFT TO RIGHT INSTALL HELICOIL INSERT IN THE 4 DESIGNATED HOLES, P/N MS21209C0630 IN 2ND, 4TH, 6TH, AND 8TH HOLES IN ACCORDANCE WITH MS35337. | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|