|
|
|
National Stock Number:
5365-01-496-1970
Federal Supply Class:
5365
National Item Identification Number:
014961970
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 123P60402 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123P60402-11 | 0BVP9 | CAPY MACHINE SHOP INC. | | 123P60402-11 | 0R2T5 | DESIGN/OL, INC. | | 123P60402-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123P60402-11 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123P60402-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 2.4700 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.2500 INCHES NOMINAL | | HOLE DIAMETER | 0.5460 INCHES MINIMUM AND 0.5550 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.6850 INCHES NOMINAL | | OVERALL LENGTH | 3.6200 INCHES NOMINAL | | OVERALL THICKNESS | 0.080 INCHES NOMINAL | | OVERALL WIDTH | 3.1600 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM-P.P. ENGINE FWD MOUNT | | SPECIAL FEATURES | ON THE 3.62 INCH SIDE THERE IS A HALF CIRCLE WITH A 0.85 RADIUS 1.81 INCHES FROM THE END | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|