|
|
|
National Stock Number:
5365-01-496-3080
Federal Supply Class:
5365
National Item Identification Number:
014963080
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 14885925 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 585-6726900 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 585-6726900 FIND 47 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.310 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL | | HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281, CL-A, FORM 6, COND-HF FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY 400 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER, BEARING | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.250 INCHES NOMINAL | | OVERALL WIDTH | 0.625 INCHES NOMINAL | | SPECIAL FEATURES | TECH DATA NOT AUTHROIZED TO BE RELEASED OUTSIDE OF US | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|