5365-01-497-5223, SPACER,PLATE

National Stock Number:
5365-01-497-5223

Federal Supply Class:
5365

National Item Identification Number:
014975223

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

4M49A4DM12-2	76301	THE BOEING COMPANY
4M49A4DM12-2	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.243 INCHES MINIMUM AND 0.258 INCHES MAXIMUM
BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.500 INCHES NOMINAL
HOLE DIAMETER	0.346 INCHES MINIMUM AND 0.366 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM
OVERALL LENGTH	47.970 INCHES MINIMUM AND 48.030 INCHES MAXIMUM
OVERALL THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
OVERALL WIDTH	0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T-3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
SPECIAL FEATURES	48 INCH STANDARD STOCK LENGTH
STYLE DESIGNATOR	NON-CIRCULAR W/SQUARE CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-7179 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial