|
|
|
National Stock Number:
5365-01-498-5377
Federal Supply Class:
5365
National Item Identification Number:
014985377
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5HL71042-101 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5862 15-5 SOLN TREATED STAINLESS STEEL ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP XM-12 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | TARGET- POSITION SWITCH ARRESTING GEAR | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL THICKNESS | 0.050 INCHES NOMINAL | | SPECIAL FEATURES | APERTURE IS COUNTERSUNK 0.253 X 100 DEG; HEAT TREAT TO 150 - 170 KSI PER AMS 2759; NHA 5HL71040-109 | | STYLE DESIGNATOR | CIRCULAR |
|
|