|
|
|
National Stock Number:
5365-01-499-1169
Federal Supply Class:
5365
National Item Identification Number:
014991169
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5HP41702-103 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | 5PTC1001 MFR REF ALL MATERIAL RESPONSES | | MATERIAL | ALUMINUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM-LOUVER,INLET BYPASS | | PROPRIETARY CHARACTERISTICS | NPAC | | OVERALL LENGTH | 5.880 INCHES NOMINAL | | OVERALL THICKNESS | 0.032 INCHES NOMINAL | | OVERALL WIDTH | 1.220 INCHES NOMINAL | | SPECIAL FEATURES | HAS 5 .244 - .264 HOLES ALONG THE LENGTH SPACED .884 ON CENTER BEGINNING AT .597 FROM ONE END ALONG ONE SIDE AND THE OTHER END IS CUT AT AN ANGLE. | | STYLE DESIGNATOR | RECTANGULAR |
|
|