|
|
|
National Stock Number:
5365-01-499-2043
Federal Supply Class:
5365
National Item Identification Number:
014992043
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5HG90721-103 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5659 TYPE 1 15-5PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.488 INCHES MINIMUM AND 0.548 INCHES MAXIMUM | | OVERALL LENGTH | 3.595 INCHES MINIMUM AND 3.655 INCHES MAXIMUM | | OVERALL THICKNESS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM HAS A RECTANGULAR APERTURE THAT HAS .250 RADIUS CORNERS. .752 LONG; .7670 WIDE WHICH STARTS 1.270 FROM THE END AND .2300 FROM OUTSIDE EDGE. THERE IS ALSO A .5000 WIDE AND .0800 DEEP CUT OUT ACROSS THE WIDTH, WITH THE APERTURE CENTERD IN THE CUT OUT AREA | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 TY+11 OR TYPE II OR TYPE VIII ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|