|
|
|
National Stock Number:
5365-01-501-0964
Federal Supply Class:
5365
National Item Identification Number:
015010964
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 211038239 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402201 ITEM 68 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402283-1 | 43689 | HUNTINGTON INGALLS INC | | 751-6402283-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402283 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402283-1 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 2 | | LAMINATION THICKNESS | 0.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-33499 COMP 2;TY-2;CL-1 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | COPPER ALLOY | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | OVERALL THICKNESS | 0.209 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | OVERALL WIDTH | 1.960 INCHES NOMINAL | | SPECIAL FEATURES | EXPORT CONTROL DWG NOT TO BE RELEASED OUTSIDE USA | | SUPPLEMENTARY FEATURES | 2 HOLES 0.28 IN |
|
|