|
|
|
National Stock Number:
5365-01-502-5915
Federal Supply Class:
5365
National Item Identification Number:
015025915
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 6393417 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6393417-1 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6395223 FIND 91 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | OVERALL LENGTH | 3.650 INCHES NOMINAL | | OVERALL THICKNESS | 1.250 INCHES NOMINAL | | OVERALL WIDTH | 2.000 INCHES NOMINAL | | LAMINATION THICKNESS | 1.250 INCHES NOMINAL | | LAMINATION QUANTITY | 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-DTL-22499,COMP 5, TYPE I, CLASS 1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TIN ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,LAMINATED;THRUSTER LATCH | | SPECIAL FEATURES | TWO HOLES,ONE.386 DIA,SET OFF CENTER,ONE IS ROUND, THE OTHER IS OBLONG SET TOWARDS CORNER .386 DIA W/ FLATE SIDES AND ROUND ENDS | | STYLE DESIGNATOR | RECTANGULAR |
|
|