|
|
|
National Stock Number:
5365-01-502-9892
Federal Supply Class:
5365
National Item Identification Number:
015029892
Description:
SPACER,SLEEVE
Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).
|
Manufacturer Information:
| M85069/2P08 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-85069/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.2480 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.2646 INCHES MINIMUM AND 0.2656 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | FLANGE OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL | | FLANGE WIDTH | 0.0050 INCHES MINIMUM AND 0.0100 INCHES MAXIMUM | | OVERALL LENGTH | 0.9990 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SPECIAL FEATURES | NOMINAL FASTNER SIZE=1/4 INCHES;BUSHING BODY IS GROOVED BEGINING 0.188 INCHES BELOW FLANGE;GROOVES ARE 0.0625 INCHES ON CENTER;THE LAST 1/4 INCH OF BUSHING IS NOT GROOVED | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2,EXTERIOR ONLY FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY | | SURFACE TREATMENT | CADMIUM OUTSIDE DIAMETER SURFACE OF BODY |
|
|