|
|
|
National Stock Number:
5365-01-503-2074
Federal Supply Class:
5365
National Item Identification Number:
015032074
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 74A340853-2043 | 76301 | THE BOEING COMPANY | | 74A340853-2043 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | FSC APPLICATION DATA | NEXT HIGHER ASSY IS CENTER, AFT, VERTICAL | | OVERALL LENGTH | 1.120 INCHES NOMINAL | | OVERALL THICKNESS | 0.170 INCHES NOMINAL | | OVERALL WIDTH | 0.650 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,TAPERED (INAVY); SHIM TAPER (DRAWING NAME) | | STYLE DESIGNATOR | RECTANGULAR | | SPECIAL FEATURES | SHIM HAS RADIAL CORNERS OF 0.250 INCHES; SHIM HAS 0.670 INCH LENGTH TAPER TO 0.030 INCHES ON ONE WIDTH EDGE |
|
|