|
|
|
National Stock Number:
5365-01-503-3555
Federal Supply Class:
5365
National Item Identification Number:
015033555
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 596-7409226 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7409226-14 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B434-2420-14 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| INSIDE DIAMETER | 4.180 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-21952,GR-HY-100 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER,GEAR SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 5.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | TECHNICAL DATA NOT AUTHORIZED TO BE RELEASED OUTSIDE US;TOP EDGE OF SPACER IS CHAMFERED 30 DEGREES BEGINING AT 0.17 INCHES FROM BOTTOM OF SPACER RING |
|
|