|
|
|
National Stock Number:
5365-01-503-4507
Federal Supply Class:
5365
National Item Identification Number:
015034507
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 9451511 | 98747 | OGDEN AIR LOGISTICS CENTER | | 9451511-10 | 24290 | DRS NETWORK & IMAGING SYSTEMS, LLC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.310 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.750 INCHES NOMINAL | | HOLE DIAMETER | 0.229 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE-AMS-00-A-200/8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMB221 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER,BLOWER | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 5.250 INCHES NOMINAL | | OVERALL THICKNESS | 0.400 INCHES NOMINAL | | OVERALL WIDTH | 0.620 INCHES NOMINAL | | SPECIAL FEATURES | TECHNICAL DATA NOT AUTHORIZED TO BE RELEASED OUTSIDE US | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SUPPLEMENTARY FEATURES | THE 2 X 0.229 INCH HOLES WILL BE DRILLED TO A DEPTH OF 0.375 INCHES THENTHROUGH WITH A 0.25 INCH DRILL.2 HOLES, 1 EACH POSITIONED TO THE INSIDE OF EACH END HOLE TO ACCOMODATE A THREADED INSERT PART NUMBER MS124735,NSN=5325-00-290-4480, TO BE INSTALLED AFTER CHEMICAL COATING IS APPLIED. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
|
|