5305-01-504-2094 SETSCREW Index 6150-01-504-2096 CABLE ASSEMBLY,RIBBON,ELECTRICAL

National Stock Number:
5365-01-504-2095

Federal Supply Class:
5365

National Item Identification Number:
015042095

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
579329553711NAVAL SEA SYSTEMS COMMAND
5793295 FIND 23553711NAVAL SEA SYSTEMS COMMAND
6394458-431442NORTHROP GRUMMAN SYSTEMS CORPORATION
6394458-453711NAVAL SEA SYSTEMS COMMAND
639445853711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
BOLT HOLE QUANTITY2
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.663 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.626 INCHES NOMINAL
HOLE DIAMETER0.406 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D-4181, POM 111 OR 112 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALPLASTIC ACETAL
PART NAME ASSIGNED BY CONTROLLING AGENCYDELRIN SPACER, FLS RECEIVER
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE CORNER RADIUS0.125 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.812 INCHES NOMINAL
OVERALL LENGTH3.250 INCHES NOMINAL
OVERALL THICKNESS0.250 INCHES NOMINAL
OVERALL WIDTH1.330 INCHES NOMINAL
SPECIAL FEATURESTECH DATA NOT AUTHORIZED TO BE RELEASED OUTSIDE OF US
STYLE DESIGNATORNON-CIRCULAR W/CORNER RADIUS


Click here to Register for Free 30-day Trial