|
|
|
National Stock Number:
5365-01-504-5561
Federal Supply Class:
5365
National Item Identification Number:
015045561
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 74A695356-2001 | 76301 | THE BOEING COMPANY | | 74A695356-2001 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.312 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.698 INCHES NOMINAL | | END RADIUS | 0.312 INCHES NOMINAL | | HOLE DIAMETER | 0.209 INCHES MINIMUM AND 0.215 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC POLYAMIDE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BLOCK-TUBE SUPPORT | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.312 INCHES NOMINAL | | OVERALL LENGTH | 1.323 INCHES NOMINAL | | OVERALL THICKNESS | 0.250 INCHES NOMINAL | | OVERALL WIDTH | 0.625 INCHES NOMINAL | | SPECIAL FEATURES | ITEM HAS 0.133 TO 0.136 INCH RADIUS ACROSS AND PARALLEL TO WIDTH ON ONE SIDE 0.661 INCH NOMINAL FROM END ALONG LENGTH; NEXT HIGHER ASSEMBLY - P/N 74A695023 | | STYLE DESIGNATOR | NON-CIRCULAR W/ROUNDED ENDS |
|
|