|
|
|
National Stock Number:
5365-01-504-7430
Federal Supply Class:
5365
National Item Identification Number:
015047430
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5793560 FIND 114 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7326248 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7326248-1 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 7326248-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM 6209,TEMPER T 6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER,DESKTOP | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 16.730 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES NOMINAL | | OVERALL WIDTH | 5.400 INCHES NOMINAL | | SPECIAL FEATURES | TCH DATA NOT RELEASED OUTSIDE U.S.: EIGHT EQUALLY SPACED MOUNTING HOLES 0.310 IN. MIN. DIA./ 0.318 IN. MAX. DIA.; 3.00 IN. APART WIDTH CENTER TO CENTER; 13.00 IN. APART LENGTH CENTER TO CENTER | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A FED SPEC SINGLE TREATMENT RESPONSE |
|
|