|
|
|
National Stock Number:
5365-01-509-6250
Federal Supply Class:
5365
National Item Identification Number:
015096250
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5HH71304-101 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | LAMINATION QUANTITY | 10 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499, COMP 6, TYPE 11 CLASS 2 MIL STD SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYAMIDE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,LAMINATED | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL LENGTH | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM | | OVERALL THICKNESS | 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM | | OVERALL WIDTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|