|
|
|
National Stock Number:
5365-01-509-7828
Federal Supply Class:
5365
National Item Identification Number:
015097828
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5793678 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5793678-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| APERTURE LENGTH | 0.980 INCHES NOMINAL | | APERTURE WIDTH | 1.380 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.438 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | MATERIAL | PLASTIC EPOXY AND GLASS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CARD GUIDE COVER | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.600 INCHES NOMINAL | | OVERALL THICKNESS | 0.062 INCHES NOMINAL | | OVERALL WIDTH | 2.310 INCHES NOMINAL | | SPECIAL FEATURES | EXPORT CONTROLLED DWG |
|
|