|
|
|
National Stock Number:
5365-01-513-6930
Federal Supply Class:
5365
National Item Identification Number:
015136930
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| P-8535-A THRU D | 61208 | TWIN DISC, INCORPORATED | | P-8535-B | 61208 | TWIN DISC, INCORPORATED |
|
Techincal Specification:
| APERTURE DIAMETER | 3.380 INCHES NOMINAL | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,BEARING-OUTPUT | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 4.100 INCHES NOMINAL | | OVERALL THICKNESS | 0.005 INCHES MINIMUM AND 0.006 INCHES MAXIMUM | | SPECIAL FEATURES | THICKNESS ALL OVER WITHIN 0.0006 INCH.MATERIAL IAW (DIN CK 10) 9/64 DIAMETED HOLE PUNCHED 1.870 INCHES FROM CENTER. | | STYLE DESIGNATOR | CIRCULAR |
|
|