8405-01-552-1755 TROUSERS,MEN'S Index 8405-01-552-1757 TROUSERS,MEN'S

National Stock Number:
5365-01-552-1756

Federal Supply Class:
5365

National Item Identification Number:
015521756

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
3654AS923-121793ASTRONICS TEST SYSTEMS INC


Techincal Specification:
BOLT HOLE QUANTITY4
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.375 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH5.000 INCHES NOMINAL
HOLE DIAMETER0.272 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.625 INCHES NOMINAL
OVERALL LENGTH16.000 INCHES NOMINAL
OVERALL THICKNESS0.750 INCHES NOMINAL
OVERALL WIDTH0.750 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCYINAVY-BAR, SPACER
MATERIALSTEEL
SPECIAL FEATURES2 CENTER HOLES ARE .190-32 UNF-2B; MATERIAL IS STAINLESS STEEL
STYLE DESIGNATORNON-CIRCULAR W/SQUARE CORNERS


Click here to Register for Free 30-day Trial