|
|
|
National Stock Number:
5365-01-559-3592
Federal Supply Class:
5365
National Item Identification Number:
015593592
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1351326 | 04664 | PIERCE MANUFACTURING INC |
|
Techincal Specification:
| APERTURE DIAMETER | 3.500 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.910 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.690 INCHES NOMINAL | | HOLE DIAMETER | 0.220 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.500 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 5.690 INCHES NOMINAL | | OVERALL THICKNESS | 0.060 INCHES NOMINAL | | OVERALL WIDTH | 4.910 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GARNISH RING, OUTLET | | MATERIAL | STEEL | | SPECIAL FEATURES | APERTURE HOLE CENTER POINT IS LOCATED 2.450 NOMINAL INCHES FROM EDGE ALONG LENGTH AND WIDTH | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT | ZINC |
|
|