5365-01-565-9784 RING,DRIVE CLAMP Index 5365-01-566-0001 PLUG,MACHINE THREAD

National Stock Number:
5365-01-565-9812

Federal Supply Class:
5365

National Item Identification Number:
015659812

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
118B713H0148306NORTHROP GRUMMAN SUPPORT SERVICES CORP
118B713H0189661WESTINGHOUSE ELECTRIC CORP SURFACE DIV
118B713H0197942NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
APERTURE DIAMETER0.178 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
OVERALL LENGTH0.750 INCHES NOMINAL
OVERALL THICKNESS0.040 INCHES NOMINAL
OVERALL WIDTH0.380 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-22241.TYPE 1 GR B MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC
PART NAME ASSIGNED BY CONTROLLING AGENCYSPACER
STYLE DESIGNATORNON-CIRCULAR W/O BOLT HOLES


Click here to Register for Free 30-day Trial