|
|
|
National Stock Number:
5365-99-147-7611
Federal Supply Class:
5365
National Item Identification Number:
991477611
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| G414/4699 ITEM 34 | K7705 | KNDS DEFENCE UK LIMITED | | G414/4699/34 | K7705 | KNDS DEFENCE UK LIMITED |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 9.25 MILLIMETERS MINIMUM AND 10.75 MILLIMETERS MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 7.25 MILLIMETERS MINIMUM AND 8.75 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 120.25 MILLIMETERS MINIMUM AND 121.75 MILLIMETERS MAXIMUM | | OVERALL THICKNESS | 2.92 MILLIMETERS MINIMUM AND 3.45 MILLIMETERS MAXIMUM | | OVERALL WIDTH | 49.25 MILLIMETERS MINIMUM AND 50.75 MILLIMETERS MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | W1.108 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PAINT |
|
|