|
|
|
National Stock Number:
5365-99-314-5599
Federal Supply Class:
5365
National Item Identification Number:
993145599
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 13050008 | 19200 | US ARMY ARDEC RDECOM | | 60118292 | K4244 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED | | MIL-S-22499 COMP3/TYPE1/CLASS1 | F6688 | LAMECO | | TYPE1,PLASTIC BONDED LS4,CLASS1 | K0302 | ATTEWELL LIMITED | | AMP 02 05 51003 | K4244 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 55.75 MILLIMETERS MINIMUM AND 56.25 MILLIMETERS MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 90.75 MILLIMETERS MINIMUM AND 91.25 MILLIMETERS MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 9.00 MILLIMETERS MINIMUM AND 9.50 MILLIMETERS MAXIMUM | | LAMINATION THICKNESS | 0.05 MILLIMETERS NOMINAL | | MATERIAL | STEEL CORROSION RESISTING AND PLASTIC | | OUTSIDE CORNER RADIUS | 12.0 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 11.75 MILLIMETERS MINIMUM AND 12.25 MILLIMETERS MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 23.75 MILLIMETERS MINIMUM AND 24.25 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 126.75 MILLIMETERS MINIMUM AND 127.25 MILLIMETERS MAXIMUM | | OVERALL THICKNESS | 1.75 MILLIMETERS MINIMUM AND 2.25 MILLIMETERS MAXIMUM | | OVERALL WIDTH | 79.75 MILLIMETERS MINIMUM AND 80.25 MILLIMETERS MAXIMUM | | SPECIFICATION/STANDARD DATA | F6688-MIL-S-22499 COM+3/TYPE1/CLASS1 MANUFACTURERS SOURCE CONTROL AND K0302-TYPE1,PLASTIC BONDED LS4,CLASS1 MANUFACTURERS SOURCE CONTROL | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | TEMP RATING | -180.0 DEG CELSIUS AND 130.0 DEG CELSIUS |
|
|