|
|
|
National Stock Number:
5365-99-794-5204
Federal Supply Class:
5365
National Item Identification Number:
997945204
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 001BO-026 | U9124 | MINISTRY OF DEFENCE, CODE RESERVED FOR THE USE OF UKNCB/CODIFICATION | | 0726366 | K2523 | EATON LIMITED | | 0726366 | U1918 | MISSION SYSTEMS WIMBORNE LIMITED |
|
Techincal Specification:
| APERTURE DIAMETER | 1.202 INCHES MINIMUM AND 1.207 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | MATERIAL DOCUMENT AND CLASSIFICATION | BS S525 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR BS S527 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OUTSIDE CORNER RADIUS | 1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM | | OVERALL LENGTH | 1.640 INCHES MINIMUM AND 1.660 INCHES MAXIMUM | | OVERALL THICKNESS | 0.005 INCHES NOMINAL AND 1.660 INCHES MAXIMUM | | OVERALL WIDTH | 1.640 INCHES MINIMUM AND 1.660 INCHES MAXIMUM | | SPECIAL FEATURES | WITH 4 HOLES 0.1457 IN. DIA EQUI-SPACED ON 1.845/1.855 IN. PCD | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES |
|
|