|
|
|
National Stock Number:
5365-99-801-2414
Federal Supply Class:
5365
National Item Identification Number:
998012414
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 039308 | K6111 | QIOPTIQ LIMITED |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 40 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499 COMPOSITION 1 TYPE 1 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OR BS1470 SIC-H NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | OVERALL THICKNESS | 0.080 INCHES NOMINAL | | SPECIAL FEATURES | C SHAPED WITH CORNERS ANGLED AT 30 DEG;5.0 IN. LG,2.25 IN. WD;4 HOLES 0.22 IN. DIA;2 SLOTS 0.22 IN. WD,0.32 IN. LG |
|
|