|
|
|
National Stock Number:
5365-99-902-4335
Federal Supply Class:
5365
National Item Identification Number:
999024335
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 13049929 | 19200 | US ARMY ARDEC RDECOM | | 60107106 | K4244 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED | | AM 02 03 25020 | K4244 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 14.75 MILLIMETERS MINIMUM AND 15.25 MILLIMETERS MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 64.75 MILLIMETERS MINIMUM AND 65.25 MILLIMETERS MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 6.75 MILLIMETERS MINIMUM AND 7.25 MILLIMETERS MAXIMUM | | LAMINATION THICKNESS | 0.05 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499 COMP 3/TYPE 1/CLASS 1 MIL SPEC 1ST MATERIAL RESPONSE OR TYPE 1,PLASTIC BONDED,LS4,CLASS 1 MFR REF 2ND MATERIAL RESPONSE | | MATERIAL | PLASTIC | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,PEELABLE | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 14.75 MILLIMETERS MINIMUM AND 15.25 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 159.75 MILLIMETERS MINIMUM AND 160.25 MILLIMETERS MAXIMUM | | OVERALL THICKNESS | 2.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 29.75 MILLIMETERS MINIMUM AND 30.25 MILLIMETERS MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | TEMP RATING | -180.0 DEG CELSIUS AND 130.0 DEG CELSIUS |
|
|