|
|
|
National Stock Number:
5365-99-963-5853
Federal Supply Class:
5365
National Item Identification Number:
999635853
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| FL17755 | U1515 | DGS&E TIG IRC | | M119NM35406 | K3743 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED | | NM35406 | K3743 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED | | R0FN12477-35 | K3743 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED |
|
Techincal Specification:
| APERTURE DIAMETER | 1.450 INCHES MINIMUM AND 1.460 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 2.177 INCHES MINIMUM AND 2.197 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | BOLT HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.287 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 17 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DD/TS/0107/86 GROUP 201(F) MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | OUTSIDE DIAMETER | 2.690 INCHES MINIMUM AND 2.710 INCHES MAXIMUM | | OVERALL THICKNESS | 0.024 INCHES MINIMUM AND 0.044 INCHES MAXIMUM | | SPECIAL FEATURES | W/1 FLAT ON OD; 2 HOLES SPLIT BY 45 DEG,2 HOLES SPLIT BY 90 DEG |
|
|