|
|
|
National Stock Number:
5430-00-132-6667
Federal Supply Class:
5430
National Item Identification Number:
001326667
Description:
TANK,LIQUID STORAGE
Detail:
A receptacle or structure of sturdy construction and of various shapes, the top of which may be open or closed, used for storage of bulk liquids such as gasoline, oil or water. The tank may be equipped with pipe fittings. Excludes tanks fabricated for use as an integral part of another system and trailer or truck mounted tanks designed for transporting liquids. See also TANK (1), ASPHALT STORAGE and TANK, HOT WATER STORAGE.
|
Manufacturer Information:
| MIL-T-10086 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SHELL MATERIAL THICKNESS | 0.1350 INCHES NOMINAL | | SHELL MATERIAL | STEEL | | INSTALLATION DESIGN | VERTICAL | | INSTALLATION LOCATION | ABOVE GROUND | | MOUNTING BRACKET | NOT PROVIDED | | TANK CAPACITY | 21000.0 GALLON, US MEASURE | | FITTING | INCLUDED | | ASSEMBLY FORM | KNOCKED-DOWN | | LIQUID FOR WHICH DESIGNED | GASOLINE OR | | OIL | | ASSEMBLY METHOD | BOLTED | | GASKET MATERIAL | RUBBER, NEOPRENE | | SHAPE | CYLINDRICAL | | OVERALL DIAMETER | 21.542 FEET NOMINAL | | OVERALL HEIGHT | 8.042 FEET NOMINAL | | BOTTOM MATERIAL | STEEL | | BOTTOM MATERIAL THICKNESS | 0.135 INCHES NOMINAL | | BOTTOM SHAPE | FLAT | | TOP | INCLUDED | | TOP MATERIAL | STEEL | | TOP MATERIAL THICKNESS | 0.1350 INCHES NOMINAL | | TOP SHAPE | CONICAL | | MANHOLE TYPE AND QUANTITY | 1 DOME | | MANHOLE MOUNTING METHOD | BOLT | | MANHOLE LOCATION | LOCATED IN CENTER OF TOP | | MANHOLE SHAPE | ROUND | | INSIDE DIAMETER | 20.000 INCHES NOMINAL | | CLEANOUT TYPE | EXTENDED | | CLEANOUT LOCATION | IN SHELL AND ADJACENT TO THE BOTTOM | | CLEANOUT SHAPE | RECTANGULAR | | CLEANOUT INSIDE HEIGHT | 36.250 INCHES NOMINAL | | CLEANOUT INSIDE WIDTH | 24.000 INCHES NOMINAL | | FITTING TYPE AND QUANTITY | 5 BOLTED FLANGE | | FITTING SIZE | 8 IN.,6 IN.,2 IN.,7 IN.,6 3/4IN. | | FITTING LOCATION | LOCATED ON LOWER PART OF SHELL 3,LOCATED ON TOP OF TANK 2 | | LADDER LOCATION | EXTERIOR AND | | INTERIOR | | ACCESSORY COMPONENTS AND QUANTITY | 3 COMBINATION RELIEF VALVE AND THIEF HATCH,8 IN.; 2 INLET-OUTLET ASSY,6 IN.; 2 INLET-OUTLET ASSY,8 IN.; 1 PIPE PLUG,1 IN.; 1 VENT VALVE,10 IN.; 1 WATER DRAW-OFF ASSY,2 IN. | | SURFACE TREATMENT | ENAMEL SYNTHETIC LUSTERLESS RIGHT SLING | | NONDEFINITIVE SPEC/STD DATA | II TYPE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-T-10086 |
|
|