| BODY THICKNESS | 0.040 INCHES NOMINAL |
| CORNER RADIUS | 0.062 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RECESS, SAME SHAPE AS THE PERIPHERY |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 9.000 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 11.250 INCHES NOMINAL |
| DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | 1.125 INCHES NOMINAL |
| DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | 0.516 INCHES NOMINAL |
| FIRST RECESS INSIDE HEIGHT | 2.750 INCHES NOMINAL |
| FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| HOLE DIAMETER | 0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| LENGTH | 13.938 INCHES NOMINAL |
| MATERIAL | PLASTIC |
| PERIPHERAL SHAPE STYLE | RECTANGLE, FOUR HOLES |
| MOUNTING OPENING SHAPE STYLE | UNTHREADED HOLE |
| SECURING DEVICE TYPE | TURNLOCK FASTENER |
| SPECIAL FEATURES | TWO EACH REINFORCEMENT BEADS MOLDED INTO TOP OF COVER DIM TYPICAL FOR BOTH BEADS L 11.500 IN.W 0.938 IN.PROTUSION H 0.250 IN.LOCATED FROM SIDE EDGE2.000 IN.TO CENTER OF BEAD-END OF BEADTO EDGE OF COVER 1.000 IN.DRAIN HOLE-DIA 0.147 LOCATED LOWER LEFT HAND CORNER IN TOP;UPPER END SIDE HAS A RECTANGULAR SLOT OPENING-MOLDED ROLLED FLANGE WITH 0.125 IN.BEND RADIUS-PROTRUDING 0.188 IN.ABOVE END SURFACE-DIM OF OPENING-W 3.000 IN.-D 2.000 IN.INSIDE CORNER RAD 0.250 IN.LOCATED 0.688 IN.FROM RIGHT HAND SIDE OF COVER TO EDGE OF SLOT;LOWER END SIDE HAS A SLOT OPENING-MOLDED ROLLED FLANGE WITH 0.125 IN.BEND RADIUS-PROTRUDING 0.188 IN.ABOVE END SURFACE-DIM OF OPENING W 1.750 IN.DEPTH 1.875 IN.TO AN INSIDE END RADIUS OF SLOT 0.875 IN.SLOT LOCATED 2.938 IN.FROM RIGHT HAND SIDE OF COVER TO EDGE OF SLOT;UPPER RIGHT HAND SIDE OF COVER HAS A SLOT OPENING LOCATED 0.438 IN.FROMEDGE OF SLOT TO TOP EDGE OF COVER-DIM OF SLOT W 1.188 IN.D 2.375 IN.WITH INSIDE CORNER RAD 0.250 IN. |
| WIDTH | 9.313 INCHES NOMINAL |