|
|
|
National Stock Number:
5905-00-066-3270
Federal Supply Class:
5905
National Item Identification Number:
000663270
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1200-599 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 1200-599 | 18802 | LANDIS AND GYR METERING INC | | 2JC3643H04REVAA | 79500 | WESTINGHOUSE ELECTRIC CORP | | 55-50-265 | 18065 | SAMARIUS PRECISION INSTRUMENTS, INC. | | 700-8119 | 02111 | VISHAY SPRAGUE INC | | 751-6067 | 12205 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV | | 751-6067 | 19176 | SERVO INSTRUMENT CORPORATION | | 78WS228 | 08815 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | LATERAL RUNOUT | 0.0015 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.002 INCHES | | MAXIMUM RUNNING TORQUE | 0.25 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.7500 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.750 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL | | BODY DIAMETER | 0.875 INCHES MAXIMUM | | BODY LENGTH | 0.685 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.1249 INCHES NOMINAL | | SHAFT LENGTH | 0.410 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 127.0 MINIMUM | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 79500-2JC3643 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.095 INCHES MAXIMUM | | OVERALL DIAMETER | 1.250 INCHES MAXIMUM |
|
|