|
|
|
National Stock Number:
5905-00-071-9901
Federal Supply Class:
5905
National Item Identification Number:
000719901
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 730404 | 02297 | ACE ELECTRONICS ASSOCIATES INC | | 730404 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 754-6264 | 12205 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 SINGLE SECTION | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STARTING TORQUE | 0.80 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.2 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 75.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 115.2 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.8750 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.870 INCHES NOMINAL | | UNDERCUT WIDTH | 0.1730 INCHES MINIMUM | | BODY DIAMETER | 2.000 INCHES NOMINAL | | BODY LENGTH | 0.934 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 1.000 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | FEATURES PROVIDED | NONMETALLIC SHAFT | | TERMINAL TYPE AND QUANTITY | 4 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 80249-73040 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | OVERALL LENGTH | 0.934 INCHES NOMINAL | | OVERALL DIAMETER | 2.000 INCHES NOMINAL |
|
|