|
|
|
National Stock Number:
5905-00-219-2929
Federal Supply Class:
5905
National Item Identification Number:
002192929
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
|
Manufacturer Information:
| ED32454 | 63743 | WARD LEONARD CT LLC | | MIL-DTL-15109 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | S-1298913 | 65054 | WESTINGHOUSE ELECTRIC CORP POWER GENERATION-GENERATOR DIV | | MILR15109 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 150.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 50.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 | | BODY HEIGHT | 0.500 INCHES NOMINAL | | BODY LENGTH | 9.625 INCHES NOMINAL | | BODY WIDTH | 5.250 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 9.625 INCHES NOMINAL | | FIXED TAP QUANTITY | 40 | | FIXED TAP TERMINAL TYPE | TAB W/SCREW | | INCLOSURE TYPE | ENCAPSULATED | | MOUNTING HOLE SIZE | 0.281 INCHES NOMINAL | | NONDEFINITIVE SPEC/STD DATA | IW FORM | | POWER DISSIPATION RATING IN WATTS | 360.000 FREE AIR | | REACTANCE CHARACTERISTIC | INDUCTIVE | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | SPECIAL FEATURES | MTG FACILITIES ARE LOCATED ON EACH END EXTENDING IN A VERTICAL PLANEABOVE THE BODY,THREE MTG HOLES ON EACH END SPACED PER PAC AAQU1A | | STYLE DESIGNATOR | TERMINALS ONE SIDE | | TERMINAL TYPE | TAB W/SCREW | | TEST DATA DOCUMENT | 81349-MIL-R-15109 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|