|
|
|
National Stock Number:
5905-00-232-1827
Federal Supply Class:
5905
National Item Identification Number:
002321827
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 1960928-1 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 9544 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 2ND SECTION | | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES C AND BETTER FINISH | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.761 INCHES MAXIMUM | | BODY LENGTH | 1.625 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 2ND SECTION | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 1ST SECTION | | PILOT DIAMETER | 0.9678 INCHES MINIMUM AND 0.9683 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM RUNNING TORQUE | 1.10 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.10 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.7500 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 1ST SECTION | | SECTION QUANTITY | 2 | | SHAFT END PLAY | 0.005 INCHES | | SHAFT DIAMETER | 0.1244 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM | | SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TEST DATA DOCUMENT | 55972-1960928 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
|
|