|
|
|
National Stock Number:
5905-00-243-0965
Federal Supply Class:
5905
National Item Identification Number:
002430965
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-0862-00 | 0PM72 | CREDENCE SYSTEMS CORP | | 311-0862-00 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | EF8003 | 58756 | CTS CORP ELECTROMECHANICAL DIV | | EF8003 | 71450 | CTS CORP | | 311-0862-00 | 80009 | TEKTRONIX, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | DUAL CONCENTRIC | | BODY DIAMETER | 0.953 INCHES MAXIMUM | | BODY LENGTH | 1.312 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | III OVERALL DIAMETER | 1.267 INCHES MAXIMUM | | III OVERALL LENGTH | 2.566 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR ALL SECTIONS | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 1.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, STEPPED | | SWITCH OPERATING POSITION | START OF ROTATION | | SWITCH TYPE | ROTARY | | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY OPEN | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 10 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80009-311-0041-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.125 INCHES NOMINAL | | UNDERCUT LENGTH | 0.625 INCHES NOMINAL |
|
|