| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 165.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 4TH SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS 3RD SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS 1ST SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.761 INCHES MAXIMUM |
| BODY LENGTH | 1.901 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CUBIC MEASURE | 7.345 CUBIC INCHES |
| FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 ALL SECTIONS |
| OVERALL DIAMETER | 2.218 INCHES MAXIMUM |
| OVERALL LENGTH | 2.951 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 2.10 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.7500 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER | 0.9688 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 4 |
| SHAFT DIAMETER | 0.1247 INCHES MAXIMUM |
| SHAFT LENGTH | 0.625 INCHES NOMINAL |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SPECIAL FEATURES | REAR SHAFT LENGTH IS 0.375 INCHES MINIMUM,DIAMETER IS 0.1247 INCHES MAXIMUM |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 67.23 1ST SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 67.23 2ND SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -10.0 TO 10.0 DEG ANGULAR ROTATION 1ST SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -10.0 TO 10.0 DEG ANGULAR ROTATION 2ND SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 14 TURRET |
| TEST DATA DOCUMENT | 55972-1960923 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |