| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| BODY HEIGHT | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| BODY LENGTH | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| ELECTRICAL RESISTANCE PER SECTION | 200.0 KILOHMS SINGLE SECTION |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.419 INCHES NOMINAL |
| MOUNTING METHOD | TERMINAL |
| OVERALL HEIGHT | 0.520 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| OVERALL LENGTH | 0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| OVERALL WIDTH | 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, SLOTTED |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 0.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.185 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| TERMINAL TYPE AND QUANTITY | 3 PIN |