|
|
|
National Stock Number:
5905-00-257-8486
Federal Supply Class:
5905
National Item Identification Number:
002578486
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5581464 | 24617 | GENERAL MOTORS CORP | | 5581464 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | 5581464 | 75042 | TRW INC TRW ELECTRONIC COMPONENTS IRC FIXED RESISTORS PHILADELPHIA DIV | | 5581464 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 2.422 INCHES MINIMUM AND 2.453 INCHES MAXIMUM | | BODY LENGTH | 1.578 INCHES MINIMUM AND 1.609 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION | | MOUNTING BUSHING LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.512 INCHES NOMINAL | | OVERALL DIAMETER | 2.578 INCHES MINIMUM AND 2.609 INCHES MAXIMUM | | OVERALL LENGTH | 3.063 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 50.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 2 TAB W/SCREW |
|
|